Evaporative Condensers

 
 
 
 
 
 
 
séria ccx
 
 
 

CCX Series

 
Centrifugal Evaporative Condensers

Equipped with centrifugal fans at the base and on the dry air side and suitable for Air Conditioning and Cooling Installations in low accoustic level environments. Easy assembly of Sound Attenuators at the inlet/outlet air discharge channels. Serpentine coils are manufactured in steel tubing and the entire assembly is hot-dip galvanized after fabrication. (Stainless steel is an option)

110 Models with nominal capacities from 78 to 6245 kW.
 
 
 
 
séria clc
 
 
 

CLC Series

 
CLC SERIES
Low Profile Centrifugal Evaporative Condensers

Equipped with centrifugal fan in monocell unit and produces low accoustic levels. Suitable for Air Conditioning and Cooling Installations. Serpentine coils are manufactured in steel tubing and the entire assembly is hot-dip galvanized after fabrication. (Stainless steel is an option)

29 Models with nominal capacities from 225 to 1509 kW.
 
 
 
 
seria cmx
 
 
 

CMX SERIES

 
Axial Pressurized Evaporative Condensers

Equipped with axial fan suitable for Industrial Refrigeration. Serpentine coils are manufactured in steel tubing and the entire assemblyis hot-dip galvanized after fabrication. (Stainless steel is an option)

72 Models with nominal capacities from 608 to 6935 kW.

 
 
 
 
serie cga
 
 
 

CGA Series

 
Axial Evaporative Condensers

Equipped with axial fan and manufactured in fiberglass reinforced polyester (FRP) with nuts and grids in stainless steel AISI 304 or UNIVAC Corrosion Protection System. A good option for cooling in industrial environments due to low electrical power requirements and resistance to corrosion. Serpentine coils are manufactured in steel tubing and the entire assembly is hot-dip galvanized after fabrication. (Stainless steel is an option)

138 Models with nominal capacities from 100 to 5660 kW.
 
 
 
 
seria cas
 
 
 

CAS Series

 
Silent Axial Refrigerant Condensers

Equipped with Axial Fans and manufactured in fiberglass reinforced polyester (FRP), screws and profiles in stainless steel or UNIVAC System.

THREE STRONG POINTS:
1 - STOP TO CORROSION - LONG LIFE
2 - LOW ACOUSTIC LEVEL
3 - LOW ENERGY CONSUMPTION

Easy maintenance and access to the interior of Candenser.
Serpentine coils are manufactured in steel tubing with galvanizing after manufacture. (Stainless steel is an option).

A good option for AIR CONDITIONING and INDUSTRIAL PROCESSES.

138 Models with nominal capacities from 100 to 5660 kW
 
 
 
 
seria cas
 
 
 

Sound Attenuators

 
The acoustic level tunning process of our Evaporative Cooling Units requires an evaluation of acoustical, thermal and cost factors. UNICLIMA can perform this evaluation and propose the appropriate changes to achieve the objectives without sacrificing thermal performance. The Sound Attenuators are designed and manufactured by UNICLIMA. We provide accoustic attenuators for centrifugal fan units (TCX - TCL - ACX - ACL - CCX - CLC) and axial fan units (TLA - TA - ALA - AMA - CLA - CGA)
 
 
 
contentorizados
 
 
 

Containerized

 
Containerized for sea
 
 
 
modelos contentorizadores
 
 
 

Sistema Anticorrosivo UNIVAC

 
UNICLIMA developed and introduced in 1996 a UNIVAC SYSTEM. This system is not only a surface treatment, but also provides superior corrosion protection. The UNIVAC SYSTEM extends equipment life and provides a lower cost solution for cases where the equipment has to work in poor water quality, environmental considerations or equipment location. It is notable its resistance to salt spray, chemicals, abrasion, impact, ultraviolet radiation (sun) and thermal shock.

The UNIVAC SYSTEM has the following proceeding:
1) Galvanized steel sheets and coated on both sides with Thermosetting Powder (Polyester Silicon Type),
2) Tightening of all components with screws and nut in stainless, avoiding this way the drilling of the panels after the Treatment of Surface with drills or self-threaded screws.
3) Use of PVC (Polyvinyl chloride) in Drift Eliminators, Water Distribution System, Fill, Tubular Connection, etc.

The combination of these three basic procedures with other small details define UNIVAC SYSTEM which provides a final product with the purpose of evaporative cooling water of high quality.